Fio 效能測試

Loading

沒用過 Fio 的請先參考使用介紹 https://benjr.tw/34632

測試環境為 CentOS 7 x86_64 (虛擬機)

效能測試需求如下:

  • Hard drive – /dev/sdb
  • iodepth – 4
  • block size – 4k , 32k
  • RW – 100% Read , 100% write

直接使用 Fio Job file (configuration) 檔案來設定會比較適合完整的效能測試,先編輯好我們要測試的不同參數值,Job file 兩段 [global] : 共用的設定參數 , [job] :特別指定的參數.

[root@localhost ~]# vi fio.cfg
[global]
filename=/dev/sdb
direct=1
ioengine=libaio
time_based
runtime=10
iodepth=4
refill_buffers
group_reporting
wait_for_previous
ramp_time=5
[JOB1]
bs=4k
rw=read
[JOB2]
bs=32k
rw=read
[JOB3]
bs=4k
rw=write
[JOB4]
bs=32k
rw=write

使用參數說明:

  • filename
    指定要測試的磁碟.
  • direct
    預設值為 0 ,必須設定為 1 才會測試到真實的 non-buffered I/O.
  • ioengine
    定義如何跑 I/O 的方式, libaio 是 Linux 本身非同步(asynchronous) I/O 的方式.
    其他還有 sync , psync , vsync , posixaio , mmap , splice , syslet-rw , sg , null , net , netsplice , cpuio , guasi , external.
  • time_based
    測試以時間為單位,另外一種方式是以 kb_base (kilobyte).
  • runtime
    這一測試所需的時間,單位為 秒.
  • iodepth=16
    同一時間有多少 I/O 在做存取,越多不代表存儲裝置表現會更好,通常是 RAID 時須要設大一點.
  • refill_buffers
    refill_buffers 為預設值,應該是跟 I/O Buffer 有關 (refill the IO buffers on every submit),把 Buffer 填滿就不會跑到 Buffer 的值.
  • group_reporting
    如果 numjobs 有指定,設定 group_reporting 報告會以 per-group 的顯示方式,而不是預設的 per-job (會顯示所有個別 numjobs 的測試結果)
  • wait_for_previous
    預設所有的 Job 會一起執行,wait_for_previous 可以讓依序一個接著一個執行.
  • ramp_time
    設定 ramp_time 會讓測試開始的一段時間不統計到整體效能裡,避免測試是跑在 cache 裏.
  • bs=4k
    bs 或是 blocksize ,也就是檔案寫入大小,預設值為 4K,如何設定這個值,因為不同性質的儲存裝置需要不同的值.看你是 File Server,Web server , Database … 設定都會不一樣.
  • rw
    可以設定的參數如下,通常在跑效能時會使用單純的 read 與 write,其他可以使用參數如下:

    • read : Sequential reads. (循序讀)
    • write : Sequential writes. (循序寫)
    • trim : Sequential trim.
    • randread : Random reads. (隨機讀)
    • randwrite : Random writes. (隨機寫)
    • randtrim : Random trim.
    • rw : Mixed sequential reads and writes. (循序讀寫)
    • readwrite : Sequential read and write mix (循序混合讀寫)
    • randrw : Mixed random reads and writes. (隨機讀寫)
    • trimwrite : Trim and write mix, trims preceding writes.

參考使用參數

  • cpumask=int
    FIO 可以指定要使用哪一顆 CPU (邏輯處理器) 來運算,指定方式為 Mask (遮罩) 的方式.
    CPU 0 (0001) -> 1 (cpumask=1) <- 這是由第一顆核心來處理
    CPU 1 (0010) -> 2 (cpumask=2) <- 這是由第二顆核心來處理
    CPU 0+1 (0011) -> 3 (cpumask=3) <- 代表要由一,二顆核心來處理

執行測試.

[root@localhost ~]# fio fio.cfg 
JOB1: (g=0): rw=read, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
JOB2: (g=1): rw=read, bs=32K-32K/32K-32K/32K-32K, ioengine=libaio, iodepth=4
JOB3: (g=2): rw=write, bs=4K-4K/4K-4K/4K-4K, ioengine=libaio, iodepth=4
JOB4: (g=3): rw=write, bs=32K-32K/32K-32K/32K-32K, ioengine=libaio, iodepth=4
fio-2.2.8
Starting 4 processes
Jobs: 1 (f=1): [_(3),W(1)] [67.0% done] [0KB/36812KB/0KB /s] [0/1150/0 iops] [eta 00m:30s]   

JOB1 bs=4k , rw=read

  
JOB1: (groupid=0, jobs=1): err= 0: pid=2429: Tue Mar  6 01:16:16 2018
  read : io=444704KB, bw=44466KB/s, iops=11116, runt= 10001msec
    slat (usec): min=48, max=3387, avg=80.71, stdev=34.02
    clat (usec): min=145, max=11311, avg=274.97, stdev=139.44
     lat (usec): min=227, max=11457, avg=357.59, stdev=148.98
    clat percentiles (usec):
     |  1.00th=[  203],  5.00th=[  209], 10.00th=[  215], 20.00th=[  217],
     | 30.00th=[  231], 40.00th=[  239], 50.00th=[  247], 60.00th=[  262],
     | 70.00th=[  282], 80.00th=[  306], 90.00th=[  346], 95.00th=[  402],
     | 99.00th=[  604], 99.50th=[  844], 99.90th=[ 2096], 99.95th=[ 2832],
     | 99.99th=[ 4128]
    bw (KB  /s): min=    0, max=47480, per=95.76%, avg=42580.40, stdev=10136.57
    lat (usec) : 250=51.62%, 500=46.49%, 750=1.28%, 1000=0.24%
    lat (msec) : 2=0.26%, 4=0.10%, 10=0.01%, 20=0.01%
  cpu          : usr=8.91%, sys=137.32%, ctx=1645, majf=0, minf=37
  IO depths    : 1=0.1%, 2=0.1%, 4=148.6%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=111173/w=0/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=4

JOB2 bs=32k , rw=read

JOB2: (groupid=1, jobs=1): err= 0: pid=2440: Tue Mar  6 01:16:16 2018
  read : io=3260.4MB, bw=333794KB/s, iops=10430, runt= 10001msec
    slat (usec): min=46, max=1894, avg=92.46, stdev=44.82
    clat (usec): min=1, max=4643, avg=294.65, stdev=145.48
     lat (usec): min=62, max=4713, avg=381.22, stdev=173.96
    clat percentiles (usec):
     |  1.00th=[  185],  5.00th=[  185], 10.00th=[  185], 20.00th=[  187],
     | 30.00th=[  187], 40.00th=[  195], 50.00th=[  209], 60.00th=[  262],
     | 70.00th=[  378], 80.00th=[  430], 90.00th=[  486], 95.00th=[  532],
     | 99.00th=[  660], 99.50th=[  764], 99.90th=[ 1256], 99.95th=[ 1592],
     | 99.99th=[ 2672]
    bw (KB  /s): min=    6, max=490368, per=92.76%, avg=309641.90, stdev=144782.12
    lat (usec) : 2=0.01%, 4=0.01%, 100=0.01%, 250=59.48%, 500=32.17%
    lat (usec) : 750=7.81%, 1000=0.34%
    lat (msec) : 2=0.16%, 4=0.02%, 10=0.01%
  cpu          : usr=9.39%, sys=130.26%, ctx=6507, majf=0, minf=65
  IO depths    : 1=0.1%, 2=0.1%, 4=134.4%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=104318/w=0/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=4

JOB3 bs=4k , rw=write

JOB3: (groupid=2, jobs=1): err= 0: pid=2441: Tue Mar  6 01:16:16 2018
  write: io=392044KB, bw=39200KB/s, iops=9799, runt= 10001msec
    slat (usec): min=48, max=1586, avg=87.01, stdev=38.36
    clat (usec): min=95, max=153225, avg=320.77, stdev=1946.09
     lat (usec): min=204, max=153283, avg=408.86, stdev=1946.08
    clat percentiles (usec):
     |  1.00th=[  229],  5.00th=[  231], 10.00th=[  235], 20.00th=[  249],
     | 30.00th=[  262], 40.00th=[  266], 50.00th=[  274], 60.00th=[  282],
     | 70.00th=[  290], 80.00th=[  302], 90.00th=[  330], 95.00th=[  362],
     | 99.00th=[  764], 99.50th=[  844], 99.90th=[ 1080], 99.95th=[ 1752],
     | 99.99th=[140288]
    bw (KB  /s): min=    0, max=45512, per=95.01%, avg=37242.40, stdev=12902.47
    lat (usec) : 100=0.01%, 250=20.68%, 500=77.56%, 750=0.71%, 1000=0.93%
    lat (msec) : 2=0.09%, 50=0.01%, 100=0.01%, 250=0.02%
  cpu          : usr=9.48%, sys=127.43%, ctx=606, majf=0, minf=30
  IO depths    : 1=0.1%, 2=0.1%, 4=148.2%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=0/w=98008/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=4

JOB4 bs=32k , rw=write

JOB4: (groupid=3, jobs=1): err= 0: pid=2444: Tue Mar  6 01:16:16 2018
  write: io=262304KB, bw=26035KB/s, iops=813, runt= 10075msec
    slat (usec): min=48, max=2753, avg=111.01, stdev=80.11
    clat (usec): min=206, max=246160, avg=4803.33, stdev=19448.08
     lat (usec): min=345, max=246720, avg=4932.55, stdev=19452.24
    clat percentiles (usec):
     |  1.00th=[  474],  5.00th=[  644], 10.00th=[  716], 20.00th=[  804],
     | 30.00th=[  868], 40.00th=[  932], 50.00th=[ 1004], 60.00th=[ 1096],
     | 70.00th=[ 1240], 80.00th=[ 1448], 90.00th=[ 2160], 95.00th=[ 3376],
     | 99.00th=[83456], 99.50th=[162816], 99.90th=[164864], 99.95th=[242688],
     | 99.99th=[246784]
    bw (KB  /s): min=    6, max=37211, per=95.61%, avg=24892.42, stdev=11341.37
    lat (usec) : 250=0.01%, 500=1.29%, 750=12.05%, 1000=36.12%
    lat (msec) : 2=38.98%, 4=7.24%, 10=0.52%, 100=3.22%, 250=0.60%
  cpu          : usr=4.50%, sys=32.14%, ctx=3705, majf=0, minf=32
  IO depths    : 1=0.1%, 2=0.1%, 4=338.5%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0%
     submit    : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     complete  : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0%
     issued    : total=r=0/w=8194/d=0, short=r=0/w=0/d=0, drop=r=0/w=0/d=0
     latency   : target=0, window=0, percentile=100.00%, depth=4

也有測試會專注在 Latency 這一項目.

  • lat (latency)
    用以統計量測 total latency numbers.
  • slat (submission latency)
    用以統計量測 submission latency numbers.
  • clat (completion latency)
    用以統計量測 completion latency numbers.

想要得到越低的 latency (延遲值),Fio 建議設定 ionice 值或是透過參數 prioclass 與 nice .

  • nice=int
    Run job with given nice value.
  • prio=int
    Set I/O priority value of this job between 0 (highest) and 7 (lowest).
  • prioclass=int
    Set I/O priority class.

請參考 https://benjr.tw/10985

綜合測試結果

Run status group 0 (all jobs):
   READ: io=444704KB, aggrb=44465KB/s, minb=44465KB/s, maxb=44465KB/s, mint=10001msec, maxt=10001msec

Run status group 1 (all jobs):
   READ: io=3260.4MB, aggrb=333793KB/s, minb=333793KB/s, maxb=333793KB/s, mint=10001msec, maxt=10001msec

Run status group 2 (all jobs):
  WRITE: io=392044KB, aggrb=39200KB/s, minb=39200KB/s, maxb=39200KB/s, mint=10001msec, maxt=10001msec

Run status group 3 (all jobs):
  WRITE: io=262304KB, aggrb=26035KB/s, minb=26035KB/s, maxb=26035KB/s, mint=10075msec, maxt=10075msec

Disk stats (read/write):
  sdb: ios=305472/172840, merge=0/0, ticks=64102/84028, in_queue=147775, util=94.56%

最後一段就是效能的統計資料,其所代表的結果如下:

  • io: Number of megabytes I/O performed.
    時間內所執行的 IO 次數.
    如果要提高 IOPS 的值,FIO 建議使用參數 disable_lat=1 , disable_clat=1 , disable_slat=1 ,FIO 在進行測試時會統計系統其他數據 延遲(Latency) 是其中一項,也就是在進行 FIO 時,不再統計延遲(Latency)的數據.

    • lat (latency)
      用以統計量測 total latency numbers,如果 slat 或是 clat 有設定時,這個選項也必須 disable.
    • slat (submission latency)
      用以統計量測 submission latency numbers.
    • clat (completion latency)
      用以統計量測 completion latency numbers.
  • aggrb: Aggregate bandwidth of threads in the group.
    平均的測試頻寬結果.
  • minb: Minimum average bandwidth a thread saw.
    因為效能有時高有時低,所以這個值代表平均最小測試頻寬結果.
  • maxb: Maximum average bandwidth a thread saw.
    因為效能有時高有時低,所以這個值代表平均最大測試頻寬結果.
  • mint: Shortest runtime of threads in the group.
    因為執行時間時高有時低,所以這個值代表 threads 執行平均最短所需的時間.
  • maxt: Longest runtime of threads in the group.
    因為執行時間時高有時低,所以這個值代表 threads 執行平均最大所需的時間.
沒有解決問題,試試搜尋本站其他內容

One thought on “Fio 效能測試

發佈留言

發佈留言必須填寫的電子郵件地址不會公開。 必填欄位標示為 *

這個網站採用 Akismet 服務減少垃圾留言。進一步了解 Akismet 如何處理網站訪客的留言資料